AquaForest Reef Salt 22kg

Fully synthetic marine salt created for aquacultured corals.
This formula is designed to create the best conditions for marine animals.
The micro-nutrients and macro-nutrients in Aquaforest Reef Salt fulfill corals’ demand for proper growth and pigmentation.

After dissolving the salt, your freshly prepared marine water can be used immediately.
The salt mix is enriched with amino acids and Vitamin C.
The addition of Vitamin C encourages growth and has positive effects on the overall health of all aquarium inhabitants.
Fully synthetic marine salt created for cultured corals.
Its formula is designed to create the best conditions for marine animals.

Suitable for use with soft corals, clams, lps corals, sps corals & fish.

Dissolve the salt in previously prepared demineralized water.
Water temperature should be about 24°C (75°F).
For salinity of 33 ppt (1.025 S.G.), dissolve about 390 g (13.75 oz.) in 10 l (2.7 US gal) of water.
Stir the solution vigorously for about 15 minutes.
Once the salt is fully dissolved and the solution is clear, the saline water is ready to use.
Keep the salt in a dry and dark place.
Once dissolved, use the salt within 5 days.
Evaporation can change water parameters, so keep freshly mixed saltwater in a sealed container if you don’t use it right away.
You should check the salinity of your saltwater again before use if you store it for a couple of days.
This product is for aquarium use only.
Not suitable for human consumption.
Keep away from children.

After dissolving the salt, freshly prepared marine water can be used immediately.
When setting up new aquariums it is recommended that the first animals are placed no sooner than 10-14 days after filling the aquarium.

Aquaforest products are manufactured in the EU under strict laboratory supervision to meet the highest quality standards.
Each product is prepared from carefully selected raw components in quantities proven to yield consistent compositi on.

How is our Marine Salt product range tested?
We mix our Marine Salt in 1 metric tonne (2204lb) batches, and 3 separate samples per batch are collected during the production stage for testing.
Each of these samples is dissolved in 15 litres (4US gal) of RO water.
Our experienced team of professionals perform ICP-OES analysis to verify that the chemical composition is within consistent range, and to rule out the presence of unwanted contaminants at the same time.
Note: Even though our salt is thoroughly mixed, not every bucket/box will be identical.
The parameters can vary slightly between containers and around a 2-3% variation is acceptable.
This fluctuation is a result of both physical properties of the mix and the limitations of the processing techniques available.
These variations are still smaller than the typical margin for error for popular hobbyist test kits. 

Recommended salinity for different aquarium types:

Macro and micro elements in the water have different levels depending on the salinity:

Parameters of salt

Cl	19000 – 19500 mg/l
Na	9720 – 11880 mg/l
Mg	1300 – 1360 mg/l
S	810 – 990 mg/l
Ca	410 – 430 mg/l
K	360 – 380 mg/l
F	1,2 – 1,3 mg/l
B	4,05 – 5,0 mg/l
Sr	7,2 – 8,8 mg/l
dKH	7,4 – 8,2 mg/l

We regret to advise that we are not able to ship large or heavy items for the standard shipping rate of $9.95.